LifeSource UB-521 Manuel d'utilisateur télécharger pdf (Page 13)

E-9

ABOUT MEMORY

The UB-521 automatically stores up to (90) blood pressure and pulse

measurements in its memory. Measurements stored in memory are

assigned an index number in the order of the newest to the oldest. The

oldest reading displays as "n01".

To retrieve readings, follow these simple steps:

1. When the display screen is blank, press and hold the

START button. While holding down the START button,

you will see the average reading displayed first. You

will then see the memory index number (e.g. n04) of

the most recent reading followed by the measurement.

Release the START button when you see the memory

index number.

2. The display will shut off automatically a few seconds

after all of the readings are displayed. To turn off the

monitor at any time, press the START button.

3. The display will shut off automatically a few seconds

after the readings are displayed.

If there are no measurements stored in memory, two 0s

displayed vertically followed by a blinking "A00"

To clear the measurement history from memory,

remove the battery from the unit and then place the

battery back into the battery holder.

NOTE: Memory will be lost if batteries become low or are removed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Pas de commentaire

LifeSource UB-521 Manuel d'utilisateur Page 13